45
46
T: 0800 0124 382
T: 0800 0124 382
TROUBLESHOOTING
Fault
Possible Cause
Solution
Food waste left on dishes
after washing.
Dishes placed incorrectly,
sprayed water not reaching
affected dishes.
Dishes leaning against one
another.
Do not overload baskets.
Do not overload baskets.
Detergent residue left in
detergent compartment.
Detergent was added when
detergent compartment was
wet.
Make sure detergent
compartment is dry before
use.
Dishes aren’t dry.
Programme without a dry
operation selected.
Rinse aid dosage set too low.
Dishes unloaded too fast.
Select another programme.
Increase rinse aid dosage
setting (see page 22 for
further information).
Allow dishes to stand before
unloading the
Dishwasher.
Rust stains on dishes.
Salt compartment cap not
closed properly.
Too much salt spilled in the
Dishwasher while filling it
with salt.
High level of salt in wash
water.
Close salt compartment cap
properly.
Clean excess salt from the
Dishwasher.
Contact your water company.
Fault
Possible Cause
Solution
Rust stains on dishes.
Satinless-steel quality of
dishes is insufficient.
Unhealthy mains grounding.
Contact the manufacturer of
the dishes. Alternatively, do
not wash the affected dishes
in your Dishwasher.
Consult a qualified electrician
immediately.
Scratched glasses.
Too much detergent used.
Salt compartment cap not
closed properly.
Use less detergent.
Close salt compartment cap
properly.
If problems persist or you experience any malfunctions not described here, contact an authorised
Servis engineer.
