15
16
T: 0800 0124 382
T: 0800 0124 382
INSTALLATION
Figure 9
The drain hose
can be connected
to a standpipe, as
shown. The hose
must be between
50cm to 110cm
from the ground.
WATER SUPPLY CONNECTION
2
Screw the straight end of the hose clockwise to a 19mm (3/4’’) cold water tap until hand
tight (fig 8). Take care not to trap or kink the hose.
Figure 8
Do not connect your Dishwasher to a surface water drain.
Connect your Dishwasher to your household drainage system (fig 9).
For your Dishwasher to function properly the outlet end of the drain hose must be at a minimum
of 50cm and a maximum of 110cm from the ground.
CAUTION:
Check to ensure that the hose is not trapped, kinked, twisted, folded or crushed.
Do not attempt to extend the drain hose by adding extra sections.
DRAIN HOSE CONNECTION
The cold water pressure for a normal household system ranges from netween 0.1 to 1 Mpa. Your
Dishwasher will run at optimum efficiency in this range.
Once you have made all of the connections, carefully turn your cold water supply on and check
for leaks.
