23
SCAN DURATION
SET PASSWORD
SET SUPER PASSWORD
Change function can set the interval of port switching in SCAN mode. You can use the keyboard
[↑] [↓]
arrow keys to move
the cursor to select, and then press
[Enter]
to save. The initial default setting is 5 seconds.
This function can set the function permission of the general user. After the setting is successful, the user can only use this
password to clear the operation setting of the port name.
This function can set the administrator password. After the setting is successful, some important settings require the
administrator password to be set and changed. Before the change, you need to correctly input the previous password
verification before you can enter the new password, as shown in the figure below. The factory default administrator
password is admin.