11
STANDARD RACK MOUNTING (DUAL RAIL SERIES)
1. Screw the front flange to the rack first. Slide the bars with
the rear flange towards the rack until the flanges make
contact with the rack, then screw the rear flanges to the
rack.
2. Slide the LCD KVM device into the support flange, use
screw in this package provided with wire front portion of
this switch is fixed to the front of the rack and locked.
3. Slide the rear attachment slide bracket along the side
strips until it reaches the rear of the switch.
4. Use the screws supplied with this package to attach
the bars to the rear of the switch. At this point, you have
completed the rack mounting of the LCD KVM switch for
subsequent use.
Note:
There may be differences between the dual rail mounting bracket and the single rail
bracket. For the dual rail products you have purchased, please refer to the illustration below
for installation.