Enable Bluetooth radio
Hold Bluetooth button
for 5 seconds
Rapidly flashing blue
LED
Bluetooth is enabled
but has not paired with
a host
Bluetooth radio pairing
Press Bluetooth button
Slowly flashing blue
LED
Bluetooth radio paired
with host and in range
Very slowly flashing
blue LED
Bluetooth radio out of
range of host
Blue LED is off
Stops transmitting
beacons
Bluetooth radio returns
to communication range
of host
Press any button
Very slowly flashing
blue LED
Re-pairs device with
host
Memory low scan
Press & hold (+) button
Flashing red LED, then
normal operation
Delete/Clear All
Press & hold (-) button
Normal operation
Memory Full Scan
Press & hold (+) button
Solid red
Memory Full
Delete/Clear All
Press & hold (-) button
Normal operation
Data protection
(enabled & on)
Scan/function/host com
Rapidly flashing red
LED
Unexpected failure
Scan/function/dock
Flashing red, green,
and amber for 5
seconds
Contact support
Battery depleted
Scan/function/dock
None
Beeper Indications
Function
Beeper Feedback
Other
Successful barcode scan
Short high tone
Laser off
Successful barcode deletion
Short medium tone
Laser off
Unsuccessful deletion
Long-short-short tones
Laser off
Successful clear all
Two long medium tones
Laser off
Successful data protection
Short-long-short tones
Connect scanner to a host PC
USB port to charge scanner
Low-high tones
Enable Bluetooth radio
Short beep
Hold Bluetooth button for 5
seconds
Bluetooth radio pairing
Short low-high tones
Bluetooth radio out of range of
host
Short high-low tones
Stops transmitting beacons
Bluetooth radio returns to
communication range of host
Short low-high tones
Re-pairs device with host
Attempt to scan when out of
Bluetooth range
Four high tones
No Bluetooth transmission
Memory Full Scan
Long tones for 5 seconds or until
scan button is released
