operation and wake up.
WakeUpLed
Enable/Disable the wake up LEDs.
Disabled
Low Battery Indication
Length red LED will display when battery is low.
3
Disable Protect Toggle
Enable/Disable the protect option.
0 (Disabled)
Max Barcode Length
Set the maximum number of characters for a
barcode.
60
CodeID
Enable/Disable saving CodeID in the scanned bar
codes file.
Enabled
ScanLED
Enable/Disable the LEDs that illuminate while the
laser scanner is active.
Enabled
*The Scanfob® CS3070 will work in batch mode if it is not connected to a Bluetooth device. When the
scanner is connected, it will function as a real-time scanner. Put simply, the toggle for batch mode/real-
time is whether the scanner is connected via Bluetooth or not.
There are numerous scan parameters available in the config file as well. These cover details such as
barcode symbologies enabled, scan angle, etc. Consult the manufacturer documentation for a full list of
these parameters.
LED Indications
Function
Action
LED Feedback
Other
Scan attempt
Press the (+) button
Flashing green
Laser on
Successful barcode scan
Solid green
Battery charge status
Hold the (+) button for
15 seconds
Flashing green
Flashing amber
Flashing red
Full charge
Less than 8 but more
than 1 hour operating
time
Less than 1 hour
operating time
Delete barcode (when in
batch mode)
Press & hold (-) button
Flashing amber
Laser on
Successful barcode
deletion
Solid amber
Laser off
Unsuccessful deletion
Solid red
Laser off
Clear all barcode data
Press & hold (-) button
for 3 seconds past scan
time
Flashing amber
Laser on
Successful clear all
Solid amber
Laser off
Charge scanner
Connect scanner to a
host PC USB port
Flashing amber
Scanner connects in
mass storage mode
Charge complete
Solid green
Toggle data protection
on/off
Press & hold both (+)
and (-) buttons for 6
seconds
None
Successful data
protection setting
Solid amber
