Sercomm DBC831V2, Setup Manual, Page: 17 / 22

15
4. Attach the doorbell camera to the mounting bracket. Make sure the doorbell camera is
firmly fixed and working properly.
Caution : To avoid damaging the rubber seal of the pogo pins, please attach the camera
to the mounting bracket flush. Mounting bracket should lay flat against the wall. Over
torqueing can warp the bracket and cause it to lose contact with pins.
Specification
LED LED x 1 (Green)
Waterproof Enclosure IP65
Pogo Pin 2 x 4 (8 Pin)
Power AC16~24V
Doorbell Attached Always on Bracket LED Activity & Behavior
Doorbell
Activity LED
Color LED
Intensity LED
Behavior Description
Bracket
Connected
Blue Dim Solid After connected to the doorbell, LED color
will turn to dim blue.