Sercomm DBC831V2, Setup Manual, Page: 13 / 22

11
4.
Choose either the Always On bracket or the regular mounting bracket that will cover the
hole of the legacy doorbell button.
Please check
Always On Bracket Installation section for more details
5. Connect the power wires from the existing doorbell to the screw terminals of the bracket.
6. Secure the bracket with screws.
Note : Install the anchors if necessary. The provided lever can be used for measuring
angles to prevent inclination.
7. Attach the doorbell camera to the mounting bracket. Make sure the doorbell camera is
firmly fixed and working properly.
Caution : To avoid damaging the rubber seal of the pogo pins, please attach the camera to
the mounting bracket flush. Mounting bracket should lay flat against the wall. Over
torqueing can warp the bracket and cause it to lose contact with pins.