Seraphim SRP 6MA-BG Series, Installation Manual, Page: 8 / 9

If the connector is damaged or deformed,
Before installation, make sure that the connector is well protected and there
should be no foreign matter such as soil, sand and gravel in the connector. If any,
it must be cleaned before installation.
the connector must be replaced before use; if there is no spare connector, please
contact seraphim in time
1"3".&5&34
14
嗡
.&$)"/*$"-*/45"--"5*0/*1"3".&5&34 3&."3
K
嗡
15
."*/5&/"/$&
Clean the glass surface of the module regularly with clean water and a soft
sponge or cloth. A mild, non-abrasive cleaning agent may be used to remove
stubborn dirt.
Check the electrical, grounding and mechanical connections every six months to
verify that they are clean, secure, undamaged and free of corrosion.
If any problem arises, consult a professional for suggestions.
Caution: observe the maintenance instructions for all components used in the
system, such as support frames, charging regulators, inverters, batteries etc.
The parameters may be updated time to time, accurate parameters please
check on our website: http://www.seraphim-energy.com or email to our techni
-
cal support team: technic@seraphim-energy.com.
INSTALLATION GUIDE FOR SERAPHIM
DUAL GLASS PHOTOVOLTAIC MODULE
INSTALLATION GUIDE FOR SERAPHIM
DUAL GLASS PHOTOVOLTAIC MODULE
:_VK
:_VK
:_VK
:_VK͹SSͨͫSS :_VK͹SSͨͫSS
:_VK͹SSͨͫSS
:_VK͹SSͨͫSS
:_VK͹SSͨͫSS
:_VK͹SSͨͫSS
:_VK͹SSͨͫSS
:_VK͹SSͨͫSS
:_VK
REMARK
installation
Module
Type
Landscape Portrait
installation
Cable Length: Cable Length:
Cable Length: Cable Length:
4UZK :NOY\KXYOUTUL:;</TYZGRRGZOUT-[OJKGXKKLLKIZO\KLXUS4U\ 9 ͫ[TZOR
it is replaced by new version.
Remark
：
If conversion cable is needed, see attachment1 for details.
.