TubTop™
Sequoia Spa Shelters™ by Sequoiaworks Inc.
Wa
ll
pa
ne
ls
Set the assembled wall on top of the ends of the
shelves. The ends of the shelves fit into the hollow part
of the corner panels.
The outside edge of the shelf fits against the frame of
the corner panel. Check alignment on both shelves and
if needed, remove the screws from the brackets and
adjust the shelves.
Adjust shelf
to correct
posi on.
Assemble the four walls on top of the shelves. Begin with the side opposite the spa controls (Corner mounted solid wall).
Next, install the two sides adjacent to the spa controls ( Shelf mounted door wall, or shelf mounted open wall). Last,
install the side at the spa controls (Corner mounted door wall).
Above photo shows how the shelf fits into the corner
panel.
Fasten the corner panel to the shelf from the underside
of the shelf using one 2 ½ inch screw at each corner.
Set the shelf-mounted door wall onto the shelf and
connect to the corner panel.
Connect with one 3 inch screw into the top of the frame
and three 2 ½ inch screw into the side of the frame as
done previously.
