TubTop™
Sequoia Spa Shelters™ by Sequoiaworks Inc.
Suppor
t B
ra
ckets
There are two methods of suppor ng the TubTop:
Typically the ground support bracket is used. However, skirt
mounted brackets are available when an adequate deck sur-
face is not available. The interior framing of the hot tub must
be sturdy enough to support the weight of the TubTop for use
of the skirt mounted brackets. Contact us for details.
Ground Support Brackets
The support brackets are fi ed to each hot tub model and are
designed to set on the ground and connect to the skir ng just
below the lip of the hot tub shell.
The control access door for the spa is normally on the same
side as the control panel. Be certain that the brackets will not
interfere with its removal.
Place the support bracket as near the start of the
radius corner of the hot tub. Place so as not to
interfere with any access panels for the hot tub.
Use #8 x 1 1/4” pan head screws to fasten the
metal connector at the bracket into the side of the
spa.
Two #8 x 1 ¼” pan
head screws
