TubTop™
Sequoia Spa Shelters™ by Sequoiaworks Inc.
Introduc on
Thank you for purchasing the TubTop™ spa enclosure manufactured by Sequoiaworks Inc™. Please preview the en re set of in-
struc ons before star ng the installa on. The instruc ons are divided into the different steps required for assembly. This enclo-
sure is made in various sizes to fit many different portable hot tubs. Thus, there may be some differences from one installa on to
the next.
The size of the TubTop MT™ is generally matched to the dimensions of the portable hot tub. The model size of the MT is sized
within a couple of inches to the size of the hot tub. For example, a model 84-84 MT would fit a hot tub that has dimensions of 84
inches x 84 inches, but would also fit a hot tub that measures 83 inches x 83 inches, or 85 inches x 85 inches. The MT side dimen-
sion referred to in these instruc ons is the length of the wall of the building not including the corner panels.
Note: the term “Spa” and “Hot Tub” are interchangeable. Both are used by manufacturers to describe the same type of product.
Required tools for assembly
-Powered screwdriver with at #2 cross- p (Phillips) bit.
-Measuring tape (either U.S. or metric), 12 . minimum
-6 . step ladder
Unpacking notes
All component packages are labeled so as to iden fy the contents. For the purpose of part iden fica on open packages in se-
quence as required for each assembly step. When uncra ng and unpacking the components of the TubTop™, care should be used
to avoid damage to the parts. The components are easily damaged by mishandling. Be extra careful when using knives and other
sharp objects in removing packaging material. Do not set components directly on to rough surfaces. Use padding or packaging
material to protect the component from abrasion.
