SEPTENTRIO PolaRx5TR, Reference Manual

Page: 277 / 512

3 Command Line Reference
sbci
gbci
setBINEXCloudIt
getBINEXCloudIt
Cd
Cd
Server Path (64) Retry
+ LOG1 ... LOG8
all
off
Cloud1 ... Cloud8
off
min15
min30
hour1
hour6
day1
RxControl: Logging > Internal Logging Settings > BINEX Logging and Upload
CloudIt is a beta feature and the command description below is subject to change.
Use this command to specify where to upload BINEX files logged in the log session identified
by the
Cd
argument (BINEX CloudIt). CloudIt configuration is done for each session indepen-
dently. The
Server
argument enables CloudIt for a given log session and specifies to which
server the BINEX files will be uploaded to. The selected
Server
must have been already con-
figured using
setCloudItConfig
command before enabling CloudIt for a given session. If
a non-configured
Server
is selected, the upload attempt will fail. To disable CloudIt for a given
session, the
Server
argument should be set to
off
.
The next argument specifies the path to the remote directory where to put the BINEX files in
the remote server.
The RINEX files are uploaded when they are complete, as prescribed by the
FileDuration
set-
tings in the
setBINEXLoggingParameters
command.
If BINEX file compression is enabled with the
setBINEXLoggingParameters
command,
the compressed files are uploaded. The files are put in the remote directory specified in the
Path
argument.
Special character sequences can be used to encode the file date in the path:
%y
is replaced
with the 2-digit year,
%Y
with the 4-digit year,
%m
with the month,
%d
with the day of the
month, and
%j
with the day of the year (starting with 001). To put a literal "
%
" in the path, use
%%
. After expansion, Path must not be longer than 80 characters.
The
Path
argument is sent as a parameter to the
Server
according to the API description, and
it is up to the server to manage the folder creation.
If the transfer fails, the receiver will periodically retry at a rate specified with the
RetryIntrvl
argument. The receiver will periodically retry the last 80 failed transfers for each log session.
Setting the
RetryIntrvl
argument to
off
disables the CloudIt retries. Periodic retries continue
for log sessions in disabled state, but are cancelled for log sessions in unused state (see the
State
argument of
setLogSession
). Pending retries are also cancelled when the
Server
is
changed or set to
off
.
Example
COM1> sbci, LOG1, Cloud1, newfolder, min30<CR>
$R: sbci, LOG1, Cloud1, newfolder, min30
BINEXCloudIt, LOG1, Cloud1, newfolder, min30
COM1>
277