CHAPTER 3. CONF
I
GUR
I
NG THE ASTERX SB3
3 Configuring the AsteRx SB3
3.1 Connecting to the AsteRx SB3
3.1.1 Powering the AsteRx SB3
The AsteRx SB3 can be powered in a number of di
ff
erent ways. The
fi
rst method is to power
the receiver by supplying 5 to 36 VDC via the open-ended power cable connected to P
I
N 1 of
the rear-panel 7-pin female PWR-COM2&3/USB socket.
You may also power the AsteRx SB3 by connecting an appropriate USB cable to the same
7-pin female PWR-COM2&3/USB socket, using either the recommended Septentrio USB
adapter or the USB socket of a PC as shown in Figure 3-1.
Figure 3-1:
Connecting the receiver through USB using the rear panel
PWR-COM2&3/USB socket
The AsteRx SB3 can also be powered through the ETH socket using power over Ethernet
(PoE). All of the rear-panel ports and their pin assignments are described in more detail in
Appendix A.
9
Summary of Contents for AsteRx SB3
Page 1: ...AsteRx SB3 User Manual ...
