CHAPTER 3. CONF
I
GUR
I
NG THE ASTERX SB3
Configure the correction stream
On the
Corrections Output
window, click on
New RTCM3 output
as shown in Figure 3-25.
You can then select the
I
PS connection con
fi
gured in the previous step. The messages
necessary for RTK and DGNSS (for GPS, GLONASS, Galileo and BeiDou) are selected by
default
but you can select any combination of correction messages that you want to output.
A summary of other RTCM messages can be found in the
’
AsteRx SB3 Reference Guide
’
.
Figure 3-25:
Output RTCMv3 di
ff
erential corrections on the con
fi
gured TCP/
I
P
server port of the Base station receiver
1
Note that if you do not have permissions for RTK Base corrections, you will only be allowed to output RTCM2
DGPS messages
27
Summary of Contents for AsteRx SB3
Page 1: ...AsteRx SB3 User Manual ...
