Quick Installation Guide
700-0047 R002
5
grommets on the cable cover allow the wiring to be inserted from different sides. The cable cover sits on two pins. See Figure 3.
5
Remove the necessary knockout (s), insert plugs and cable grommets.
6
Use the mounting plate to mark the desired position of the DVR and drill the 6 mounting holes. Make sure the front flange is facing
forward. This is where the DVR is attached to the mounting plate with security Torx screws.
7
Fasten the mounting plate to the mounting surface using the six #10 × ¾ screws provided.
8
Slide the DVR onto the rails of the mounting plate. See Figure 4. (Only the rails are shown to highlight the detailed area.)
Figure 3
Cable cover removed from DVR
Figure 4
Mounting plate front view. sliding the DVR on, attaching security Torx screws
Pin × 2
