Sentryus HD-NVR Series User Manual Download Page 42

Page: 42 / 163

User Manual of Network Video Recorder

3.1

Introduction of Live View

Live view shows you the video image getting from each camera in real time. The NVR automatically enters Live

View mode when powered on. It is also at the very top of the menu hierarchy, thus pressing the ESC many times

(depending on which menu you’re on) brings you to the Live View mode.

Live View Icons

In the live view mode, there are icons at the upper-right of the screen for each channel, showing the status of the

record and alarm in the channel, so that you can know whether the channel is recorded, or whether there are

alarms occur as soon as possible.

Table 3. 1

Description of Live View Icons

Icons

Description

Alarm (video loss, video tampering, motion detection, sensor alarm or VCA alarm)

Record (manual record, continuous record, motion detection , sensor alarm or

VCA alarm triggered record)

Alarm & Record

Event/Exception (motion detection, sensor alarm, VCA alarm or exception

information, appears at the lower-left corner of the screen. Please refer to

Chapter 8.6 Setting Alarm Response Actions

for details.)

Summary of Contents for HD-NVR Series




































































































































































Search results

Summary of Contents for HD-NVR Series

Reviews:

Related manuals for HD-NVR Series

Brands by name

Popular brands

Sentryus HD-NVR Series, User Manual

Search results

Summary of Contents for HD-NVR Series

Reviews:

Related manuals for HD-NVR Series

Brands by name

Popular brands