Sentryus HD-NVR Series, User Manual

Page: 144 / 163

User Manual of Network Video Recorder
143
14.4.1 Adding a User
Steps:
1. Enter the User Management interface.
Menu >Configuration>User
Figure 14. 4 User Management Interface
2. Click the Add button to enter the Add User interface.
Figure 14. 5 Add User Menu
3. Enter the information for new user, including User Name , Password , Confirm , Level and User’s MAC
Address .
Password : Set the password for the user account.
STRONG PASSWORD RECOMMENDED – We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
Level: Set the user level to Operator or Guest. Different user levels have different operating permission.
•
Operator: The Operator user level has permission of Two-way Audio in Remote Configuration and all
operating permission in Camera Configuration by default.
•
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only has the
local/remote playback in the Camera Configuration by default.
User’s MAC Address: The MAC address of the remote PC which logs onto the NVR. If it is configured and
enabled, it only allows the remote user with this MAC address to access the NVR.
4. Click the OK button to save the settings and go back to the User Management interface. The added new
user will be displayed on the list, as shown in Figure 14. 6.