Sentryus HD-NVR Series, User Manual

Page: 16 / 163

User Manual of Network Video Recorder
15
Figure 1.2 Front Panel of 16CH/32CH NVR
Table 1. 2 Description of Control Panel Buttons
No. Name Function Description
1 POWER
ON/OFF Power on/off switch.
2 USB Interface Connect to USB mouse or USB flash memory.
3 IR Receiver Receiver for IR remote control. devices.
4
POWER Power indicator lights in green when DVR is powered up.
READY
Ready indicator is normally green, indicating that the DVR is functioning
properly.
STATUS
Indicator turns green when DVR is controlled by an IR remote control with
the address from 1~254;
Indicator turns red when the SHIFT button is used;
Indicator does not light when the DVR is controlled by a keyboard or by
the IR remote control with the address of 255;
Indicator turns green when the DVR is controlled by IR remote control
(with the address from 1~254) and keyboard at the same time , and the
SHIFT button is not used;
Indicator turns orange : (a) when the DVR is controlled by IR remote
control (with the address from 1~254) and keyboard at the same time and
the SHIFT button is used as well; (b) when the DVR is controlled by IR
remote control (with the address from 1~254) and the SHIFT button is
used.
ALARM Alarm indicator turns red when a sensor alarm is detected.
HDD
HDD indicator blinks in red when data is being read from or written to
HDD.
Tx/Rx
TX/RX indictor blinks in green when network connection is functioning
properly.
5
DVD-ROM
Slot for DVD-ROM.
6
DIRECTION
The DIRECTION buttons are used to navigate between different fields and
items in menus.
In Playback mode, the Up and Down button is used to speed up and slow
down recorded video.
In All-day Playback mode, the Left/Right button can be used to select the
recorded video of next/previous day; in Playback by Normal Video Search,
the Left/Right button can be used to select the next/previous recorded
file.
In Live View mode, the directional buttons can be used to cycle through
channels.
In PTZ control mode, it can control the movement of the PTZ camera.
ENTER
Confirm selection in any of the menu modes. It can also be used to tick
checkbox fields.
In Playback mode, it can be used to play or pause the video.
In Single-frame Playback mode, pressing the ENTER button will advance
the video by a single frame.
In Auto-switch mode, it can be used to stop /start auto switch.
7
SHIFT
Switch of compound keys between the numeric/letter input and
functional control.
1/MENU
Enter numeral “1”;
Access the main menu interface.
2ABC/F1
Enter numeral “2”;
Enter letters “ABC”;