6
7
English
Bolt Down Instructions
Locking And Unlocking Your Safe
Close the lid. Once the lid is closed, the safe is securely locked.
To optimize security please be sure to always lock your safe.
NOTE:
When not in use – the safe will go into standby mode. This is a lower power mode.
Pressing a key will end the standby mode.
A
Press any button once to bring the safe out of
standby mode.
B
Put in your code.
–OR–
Use the override key to gain access to your safe.
Bolt down kit contents:
2 Anchors
2 Lag screws
2 Washers
Tools needed to bolt safe to a surface:
Drill
Wrench
9/32" (7.2 mm) drill bit – for drilling into wood
3/8" (9.5 mm) drill bit – for drilling into masonry
Select a suitable location for your Quick Access Pistol Safe.
Set the safe in place, and use the predrilled holes provided on
the bottom of the safe to mark the location of the holes to be
drilled in the surface.
WARNING
Do NOT drill from any location inside the safe.
NOTE:
This product is intended to be mounted with a horizontal orientation.
Move the Quick Access Pistol Safe while you drill the marked
holes in the surface.
Locking your safe
Bolting down your safe
Unlocking your safe
1
1
1
2
2
2
