background image

2

 

WARNING

Gun warning  

This product is not intended for the secure storage of all materials. Items such as firearms, other 
weapons, combustible materials, or medication should NOT be stored in this unit. 

NOTICE

Do NOT store delicate items directly in your safe. 

SentrySafe products which offer fire protection have a proprietary insulation that has a high 
moisture content. In addition, the SentrySafe advanced safes close airtight to offer water resistance, 
which may also cause moisture to accumulate inside your safe. The desiccant packet included in 
your safe during shipment should be left in your safe. DO NOT DISCARD IT. It is intended to help 
absorb moisture which may accumulate inside your safe. Please open your unit once every two 
weeks to avoid moisture accumulation.

If you choose to store delicate items such as jewelry with working parts, watches, stamps, or 
photos in your safe, we recommend putting them in an air-tight container, prior to placing them in 
the safe for storage.

NOTE: 

SentrySafe will not be responsible for any damage or loss of items placed in the unit due to 

moisture. 

Do NOT store pearls in this safe.

  

In the event of a fire, potential damage to delicate pearls occurs at temperatures much lower 
than the 350°F interior performance measure which the UL classification performance standard 
indicated guarantees. Therefore, DO NOT store pearls in your SentrySafe product. 

Do NOT store computer disks, audio-visual cassettes or photo negatives.

  

This product is not intended to protect computer floppy or diskettes, cartridges and tapes, audio or 
video cassettes or photo negatives.  

Your safe is only part of your total security protection.

SentrySafe recommends that you store your safe in closets, offices, basements, bedrooms and any 
other locations that are convenient for you but out of direct line of sight from prying eyes. The  
location of the safe does not affect the safe’s ability to protect your valuables inside. 

Summary of Contents for Fire-Safe
















Reviews: