OPENING THE SAFE WITH ACCESS KEY
For Large Keypad Depository Safe
1. To expose the key access, remove logo plate screws with
provided Allen wrench
2. Insert access key into key access, and turn clockwise to open
For Standard & Compact Keypad Depository Safe
1.
To expose the key access,
gently lift off the key cover
2. Insert access key into key access, and turn clockwise to open
NOTE: Store keys in a secure place. NOT inside of the safe
BATTERIES
1. Remove battery cover on the inside of the safe door
2. Insert 4 new AA batteries into the battery compartment and
pay attention to the polarity of the batteries
3. Replace compartment cover
CREATING PERSONAL PIN CODES
Safe retains only two 3-8 digit pin codes
1st Personal Pin Code
1. With safe open, press and release the
initialization button
located on the inside of the safe door. Yellow
indicator light
will
be on.
2. On the key pad input your
3-8 digit pin code
and press and
release
either "A" or "B"
to confirm. Yellow
indicator light will
turn off
.
2nd Personal Pin Code
1. On the key pad press and release “0” twice. Press and
release the
initialization button
located on the inside of the
safe door. Yellow
indicator light
will be on.
2. On the key pad input your
3-8 digit pin code
and press and
release
either "A" or "B"
to confirm. Yellow
indicator light will
turn off
.
TESTING PERSONAL PIN CODES
1. With safe door open, and the handle/lock knob in the lock
position. Enter in 1st personal pin code
on the key pad
and
press and release
either "A" or "B" to confirm.
Successful Save
- You will hear 2 short beeps
- The green indicator light will flash
- Move handle to the right to retract bolts
Unsuccessful Save
- You will hear 9 short beeps
- Handle will not move and bolts will stay extended
- Repeat steps CREATING PERSONAL PIN CODES
2. To test 2nd personal pin code, enter in 2nd personal pin code
on the key pad
and
press and release
either "A" or "B"
to confirm. See “Successful Save” and
“Unsuccessful Save” above
3. Test a pin code that is not registered to make sure the safe
does not open to complete testing process
OPENING & CLOSING SAFE WITH PERSONAL PIN
CODES
OPEN:
1. On the key pad enter in either of your
3-8 digit pin codes
and
press and release
either "A" or "B"
to confirm.
2. Turn the handle/lock knob to the unlock position and pull the
safe door open
NOTE
After entering pin, you have 5 seconds to turn the knob before
the mechanism re-locks automatically
CLOSE:
To close safe, close door and turn knob to the lock position
LOCK OUT
Lock out mode is activated when the wrong personal pin code is
entered
- 3
consecutive
times, Lock out mode will last 20 seconds
-
6 consecutive times,
Lock out mode will last 5 minutes
CHANGING PERSONAL PIN CODES
Follow steps in “CREATING PERSONAL PIN CODES”
Parts of the Control Panel
C. Indicator Lights
D. Key Pad
A. Handle
B. Logo Plate and
Key Access
Parts of the Control Panel
C. Indicator Lights
D. Key Pad
A. Lock Knob
B. Key Cover and
Key Access
Parts of the Inside of the Safe Door
E. Initialization Button
F. Battery Compartment
A
F
B
C
D
C
B
D
E
WARNING:
Avoid leaving door open and unattended; it will
allow unauthorized individuals to reprogram the safe,
gaining full access to the safe and contents.
User Manual For Depository Safe
1
2
3
A
4
5
6
0
7
8
9
B
A
Large Keypad Depository Safe
Standard & Compact Keypad Depository Safe
1
2
3
A
4
5
6
0
7
8
9
B
* Actual models may vary
Loc
k Posi
t
i
o
n
U
n
l
oc
k Po
s
iti
on
Loc
k Posi
t
i
o
n
U
n
l
oc
k Po
s
iti
on
See reverse side for more information
12/20
BC657
