Sentry US WAP-ABG2458 User Manual Download Page 53

Page: 53 / 56

www.sentryus.com

R201204-V27

Administration: Factory Defaults

This Factory Defaults allows you to restore the AP’s configuration to its factory default
settings.

Factory Defaults
Restore Factory Defaults: Click this button to reset all configuration settings to their
default values. Any settings you have saved will be lost when the default settings are
restored.

Status: Local Network

The Local Network screen on the Status Tab displays the status of your network.

Identity
Device Name: The device name for user identification.
Firmware Version: The current AP firmware version display here.

Local Area Network
Local MAC Address: This is the AP’s local physical MAC Address.

Connection Type: The current IP address type --- Dynamic or Static.

IP Address: The current AP’s IP address.
Subnet Mask: This is AP’s local subnet mask.

Default Gateway: This is the local network gateway IP.

Summary of Contents for WAP-ABG2458













































Search results

Summary of Contents for WAP-ABG2458

Reviews:

Related manuals for WAP-ABG2458

Brands by name

Popular brands

Sentry US WAP-ABG2458, User Manual

Search results

Summary of Contents for WAP-ABG2458

Reviews:

Related manuals for WAP-ABG2458

Brands by name

Popular brands