Copyright © 2012. All Rights Reserved.
10
www.sentryus.com
R201204-V27
Power
The Power LED lights up and will keep while the AP is powered on.
When the AP goes through its self-diagnostic mode during every
boot-up, this LED will flash. When the diagnostic is complete, the LED
will be lit continuously.
11a
The 11a LED flashes when there is a successful Wireless-A connection.
11b/g
The 11b/g LED flashes when there is a successful Wireless-B/G
connection.
LAN
The LAN LED lights up when Ethernet port of AP was connected
flashing that indicates the network activity over that port.
