Copyright © 2012. All Rights Reserved.
39
www.sentryus.com
R201204-V27
Most users will be able to configure the AP and get it working properly using the
default settings.
Network Setup
Identity
Device Name: These fields allow you to input a host name for the AP.
Local Area Network
Dynamic: If your LAN supports DHCP assigning dynamic IP address then
please select this type.
Static IP: This is the default connection type. If you are required to use a fixed
IP address to connect to the LAN, then select Static IP.
IP Address: This is the AP’s IP address.
Subnet Mask: This is the AP’s Subnet Mask.
Default Gateway: This is the AP’s Gateway Address.
Those above items can be adjusted that depends on real network architecture if it is
necessary. Change these settings as described here and click the Apply button to apply
your changes or click. For additional information, click Help.
