Copyright © 2012. All Rights Reserved.
41
www.sentryus.com
R201204-V27
If you have both 802.11g and 802.11b devices in your network, keep the
default setting ---b/g mixed.
If you have only 802.11g devices, select 802.11g Only.
If you have only 802.11b devices, select 802.11b Only.
If you want to run a high-speed transmission, select 802.11g Turbo.
Network Name (SSID): The service set identifier (SSID) or network name. It is case
sensitive and must not exceed 32 characters, which may be any keyboard character.
You shall have selected the same SSID for all the APs that will be communicating with
mobile wireless stations.
Broadcast SSID: When wireless clients survey the local area for wireless networks to
associate with, they will detect the SSID broadcast by the AP. To broadcast the AP's
SSID, keep the default setting, Enabled. If you do not want to broadcast the AP's SSID,
then select Disabled.
Channel: Select the appropriate channel from the list provided to correspond with
your network settings. You shall assign a different channel for each AP to avoid signal
interference.
