PAGE 23
With the Direct Command feature, you can perform various functions (e.g., unlock a door) from you phone. This feature is ONLY
available for a single family residence or a manager’s phone sharing a phone line with the Crown Jewel.
1. Pre
ss
3. Pre
ss
to
s
ave the data
2. Direct Command Num
b
er (0-3)
The unit will receive direct command
s
from
b
oth the re
s
idence and a remote phone.
EXAMPLE:
1
2
3
O
= Di
s
a
b
le Direct Command
s
1
= Ena
b
le
s
Direct Command
s
from re
s
idence phone only
2
= Ena
b
le
s
Direct Command
s
from a remote phone only
3
= Ena
b
le
s
Direct Command
s
from re
s
idence or remote phone
Enable or Disable Direct Commands -35
When enabled it allows the resident to control the system’s relays from a touch tone phone.
FACTORY SETTING: Enabled.
Direct Commands from Resident’s Phone
The following commands are carried out by simply picking up the residence telephone and dialing the following key combinations.
IMPORTANT NOTE:
These steps will override any existing unlock schedules for the day they are entered.
NOTE:
Some areas of the country have a phone company that makes use of the “#” or “
✱
” key as a code to invoke a special
function. If this is true of your area, you can choose an alternate direct command prefix that uses a number followed by a “#” key.
If you wish to uses this feature, please refer to Setting Alternate Prefixes, page 29.
2.
Select one of the following options:
1. Press
from the residence phone.
The unit is now prepared to accept a direct command.
LATCH RELAY 2 OPEN:
Press
then
Latches relay #2 open, Typically used when the gate/door needs to be kept open for an
unknown amount of time.
LATCH RELAY 1 OPEN:
Latches relay #1 open, Typically used when the gate/door needs to be kept open for an
unknown amount of time.
Press
then
CYCLE RELAY 2:
Press
then
Cycle relay #2. Typically used to momentarily open a door/gate for a visitor without
having the visitor initiate a call.
CYCLE RELAY 1:
Cycles relay #1. Typically used to momentarily open a door/gate for a visitor without
having the visitor initiate a call.
Press
then
A.
B.
C.
D.
Continued on next page.
Various Direct Commands from the Resident’s Telephone - 91-97
