![background image](http://html.mh-extra.com/html/sentera-controls/mtv-1-cp/mtv-1-cp_mounting-and-operation-instructions_1244495006.webp)
www.sentera.eu
MIW-MTV-1-CP-EN-000 - 22 / 08 / 2018
6 - 8
back to the table of contents
Fig. 1 Wiring and connections
Output voltage
Power supply
Dry contact for
remote ON/OFF
4.
Mount the internal enclosure into the wall adhering to the mounting dimensions
shown in
Fig. 2
.
Fig. 2 Mounting dimensions - inset mounting
82
89
26
33
50x50
62
62
60
NOTE
Mount the unit so that the terminal block and connections are at the lower side.
5.
To select the output type, use the jumper shown in
Fig. 3.
6.
Adjust the minimum and maximum output speed trimmers using a screwdriver.
See
Fig. 4
.
Fig. 3 Output selection jumper
Fig. 4 Trimmers
7.
Mount back the cover and secure it with the nut.
8.
Put back the knob and turn it to off position.
9.
Turn on the power supply.
Vmin adjustment
trimmer
Vmax adjustment
trimmer
MTV-1-CP
230 VAC POTENTIOMETER WITH MIN
& MAX SETTINGS, DRY CONTACT