www.sentera.eu
MIW-MTP-G010-AT-EN-000 - 29 / 08 / 2018
4 - 7
back to the table of contents
PRODUCT DESCRIPTION
MTP-G010-AT potentiometer is intended for direct control of EC fans / motors and
actuators. It requires a supply voltage of 24 VDC or 24 VAC and provides a stepless
output signal that can be set by a rotary knob with off-position. The output range is
adjustable via two internal trimmers between Vmin (0—7 VDC) and Vmax (3—10 VDC).
Its splash-proof enclosure is suitable for both inset and surface mounting.
ARTICLE CODES
Article code
Power supply
Output
MTP-G010-AT
24 VAC or 24 VDC
0—10 VDC
INTENDED AREA OF USE
■
Applications where a 0—10 VDC control signal is required
■
For indoor use only
TECHNICAL DATA
■
Power supply: 24 VAC or 24 VDC
■
Output: Vmin—Vmax
■
Load: R
L
≥ 2 kΩ
■
Vmin: 0—7 VDC
■
Vmax: 3—10 VDC
■
Enclosure:
►
External: ASA, white-ivory (RAL 9010), IP54 (according to EN 60529)
►
Internal: polyamide, white-ivory (RAL 9010), IP44 (according to IEC 60335)
■
Operating ambient conditions:
►
temperature: 0—40 °C
►
rel. humidity: < 100 % rH (non-condensing)
►
Storage temperature: -10—55 °C
STANDARDS
■
Low Voltage Directive 2014/35/EC
■
EMC Directive 2014/30/EC
■
WEEE Directive 2012/19/EC
■
RoHs Directive 2011/65/EC
MTP-G010-AT
ACTIVE
POTENTIOMETER
