www.sentera.eu
MIW-MTP-D010-AT-BT-EN-000 - 06 / 02 / 2019
7 - 7
back to the table of contents
NOTE
A 5 mm hole can be drilled at the bottom of the external enclosure to drain the
condensed water.
VERIFICATION OF INSTALLATION INSTRUCTIONS
ATTENTION
Use only tools and equipment with non-conducting handles when working on
electrical devices.
■
In case of faulty operation, please check if:
►
the right voltage is applied;
►
all connections are correct;
►
the regulated device is functioning.
TRANSPORT AND STORAGE
Avoid shocks and extreme conditions; stock in original packing.
WARRANTY AND RESTRICTIONS
Two years from the delivery date against defects in manufacturing. Any modifications
or alterations to the product after the date of publication relieve the manufacturer
of any responsibilities. The manufacturer bears no responsibility for any misprints or
mistakes in this data.
MAINTENANCE
In normal conditions this product is maintenance-free. If soiled, clean with a dry or
damp cloth. In case of heavy pollution, clean with a non-aggressive product. In these
circumstances the unit should be disconnected from the supply. Pay attention that no
fluids enter the unit. Only reconnect it to the supply when it is completely dry.
MTP-D010
ACTIVE
POTENTIOMETER
