STC-GE83A
STC-GEC83A
User Guide
38
Rev 1.01
4. Sequence for the saving commands to the EEPROM
Please use the following sequence for saving the commands to the EEPROM
a.
Set “1” to the 80H.0 to accept the “write control to the EEPROM”.
b.
Send the command and the save data with the EEPROM access command, which is set to “1” for the page selection.
c. The camera sends back one of the following receiving codes after writing the EEPROM.
01H: OK
17H: EEPROM write error
d. 80H.0 is changed to
“0” automatically after writing the EEPROM
Note 1: When 80H.0 is “0” it will not save to the EEPROM
Note 2: When saving multiple sequences
of commands: “10H, 11H, 12H and 13H” or “22H, 23H and 24H”.
Note 3: When saving multiple command data (which are not a sequence command) to the EEPROM it is necessary to operate
steps a.~d. the same number of times.
Example of a multiple command: “10H, 13H, 19H and 1BH” or “20H, 23H and 25H”.
