SenTech IR-SNIF-MC-1 Installation And Operation Manual Download Page 37 | Manualshive

Page: 37 / 54

background image

34

approximately

15

minutes,

whichever

comes first.

Setup:

The Setup Menus are accessed by

pressing  the  "4"  key.    The  operator  will  be
asked  to  enter  a password  to  continue  into
the  Setup  Menus.    There  are  five
passwords.    Passwords  1  through  4  are
user  definable  (default  passwords  are
"111",  "222",  "333",  "444").    The  last
password is permanently set at "999".

Setup Menu:

If the correct password is

entered, the unit will display the Setup
Menu Screen. From the Setup Menu, the
operator

can

access

the

refrigerant

monitoring settings (Sample Setup), the gas
code

assigned

to

each

refrigerant

programmed  in  the  monitor,  system
configurations  settings  and  the  contact
screen.

Sample Setup:

Press the “1” key to enter

Sample  Setup.    The  sample  setup  screens
allow  the  user  to  set  the  gas  code  for  the
refrigerant  to  be  monitored,  the  distance  of
the tube used for the sample, and the Low,
Main  and  high  alarm  thresholds.    The  first

sample  setup  screen will  display  1  to  enter
parameters,  or  2  to  enable  or  disable
sample areas.

Press  the  “1”  key  to  setup  parameters  for
each area.

Press the left or right arrow keys to change
from  one  sample  area  to  another.    Press
the  “ENT”  key  to  move  the  arrow  cursor
from line one to line two.

Press the left or right arrow keys to change
from one gas type to another.  The gasses
are  organized  in  numerical  order,  with
refrigerants  first,  and  fire  suppression
agents

or

blowing

agents

following

refrigerants. One the appropriate gas is
displayed, press the “ENT” key to move the
cursor from line two to line three.

As of January 1, 2003 the standard IR-SNIF
monitor is capable of detecting and
responding

to

the

following

list

of

refrigerants.

R-11,  R-12,  R-13,  R-22,  R-113,  R-114,  R-
123,  R-134A,  R-401A,  R-401B,  R-402B-
HP81, R-404A-HP62,

Manual Override 1

PPM 0 12:00

R-134A

Press ENT for Menu

* SenTech Monitor *
ENTER PASSWORD
Followed By ENT
Code : 0

1)…IR Setup
2)…N/A
3)…System Setup
4)…Contact ABORT

Program Setpoints
For Each AREA
1 – Setup
2 – Enable ABORT

AREA         1           <- ->
R-134A       8
Distance   250
       ENT   or    ABORT

AREA         1
R-134A       8         <- ->
Distance   250
       ENT   or    ABORT

«
...
35
36
37
38
39
...
»

Summary of Contents for IR-SNIF-MC-1























































Reviews:

No comments

Related manuals for IR-SNIF-MC-1

Brand: Hammond Pages: 754

Bass Master Rockabilly

Brand: K&K Sound Pages: 2

Brand: UEi Pages: 8

Brand: Daewoo Pages: 17

Brand: YOSensi Pages: 3

Brand: ASCEL Electronic Pages: 64

Brand: Seben Pages: 16

DGX Gears XTRA Regulator

Brand: Dive Gear Express Pages: 26

Brand: Velleman-Kit Pages: 9

Brand: RADWAG Pages: 12

Brand: SED Pages: 52

Brand: Flow vision Pages: 76

Brand: Iradion Pages: 34

Sphensor PRMPA0401

Brand: LSI LASTEM Pages: 32

FSVA3000 Series

Brand: R&S Pages: 13

Brand: YATO Pages: 44

Brand: PASI Pages: 6

Brand: SAEHAN Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands