Chapter 1: Introduction
3
RTM II FlexNet User Guide
DUG-10009-01
1.1.1 LED Indications
(see Figure 1-3)
LED
Indicator
Description
1 - Radio Transmit
Blinking Green
The RTM II is sending data to AutomationControl.
Blinking Red
The RTM II is receiving data from AutomationControl.
2 - IED Comm
Green
Data being sent to the IED.
Red
Data being received from the IED.
3 - FlexNet Radio
Coverage
Solid Green
Successful power on (power on call was received), the
Signal to Noise Ratio (SNR) is greater than 15.
Blinking Green
SNR is between 7 and 14.
Off
SNR is less than 6 or there is no communication from
AutomationControl.
4 - RTM Status
Blinking Green
The RTM II is functioning normally.
On or Off
There is a serious internal problem with the RTM II. Try
disconnecting it from power and then powering it back up.
If this LED remains off, contact Sensus Automation
Technical Support.
Summary of Contents for RTM II FlexNet
