manualshive.com logo in svg

Sensus AR5000, User Manual, Page: 72 / 86

Share
Download
Sensus AR5000 User Manual Download Page 72

3–16

Sensus Metering Systems

Chapter 3: Find Route Information

The system displays the results of the search.

No Matches Found Message

• If the system cannot find the information you entered, 

then the screen displays a No Matches Found message.
Press the Esc key to clear the No Matches Found 
message and end the search.

• If the system finds more than one match for the 

information you entered, the screen displays the first 
match, along with the following choices:
Stop here - Press the ENTER key to stop the search on 
the displayed location.

Search Results Screen

Next Location - Press the TAB> key and the system 
displays the next location in the search results.
You can use the TAB> key to scroll through the entire 
list of search results. Once you reach the end of the 
search results, the system displays a No More Matches 
Found message.
Press the Esc key to clear the No More Matches Found 
message and end the search.

No More Matches Found Message

Summary of Contents for AR5000























































































Reviews:

No comments