manualshive.com logo in svg

SensorTherm METIS H311, User Manual, Page: 5 / 58

Share
Download
SensorTherm METIS H311 User Manual Download Page 5

METIS M311 / M322 / H311 / H322 (17-pin) 

Safety

 

 

 

5 

1.5 

Copyright 

This manual is protected by copyrights and are intended solely for internal purposes. 
It is not permitted to transfer these instructions to third parties, duplication in any kind and form - includ-
ing excerpts - as well as recovery and / or notification of contents without written permission of the man-
ufacturer, except are internal purposes. 
Contraventions are liable for damages. All other rights reserved. 

 
 

1.6 

Customer Service / Spare Parts

 

For technical information contact our customer service. 
It is recommended to purchase spare parts and accessories direct from Sensortherm (manufacturer). 

 

In addition, our employees are always interested in new information and experiences arising from the 
application and can be valuable for improvement of our products. 

 
 

1.7 

Disposal 

Dispose of the product properly when it is no longer usable: pyrometers include electrical and electronic 
waste and have to be recycled or disposed environmentally friendly or to send to the manufacturer for 
disposal. 

 
 

2 

Safety

 

2.1 

Use of the Manual 

  Any person who is going to work with the device must have read and understood the operating man-

ual before beginning. 

  Operation and maintenance of the system is only to be performed by trained personnel. 

  This manual is to be kept and handed over when passed on. 

 
 

2.2 

Supplementary Information about the Operation 

The following symbol is used to simplify the search for useful information: 

 

 

NOTE: 

This combination of symbol and signal word indicates a potentially hazardous situation 

that can lead to property and environmental damage if not avoided. 

 

 

INFO: 

This symbol indicates useful tips, recommendations and information for efficient and 

trou-ble free operation. 

 
 

2.3 

Responsibility of the Operator 

If the device is used in the commercial sector the operator is subject to the legal responsibilities for 
workplace safety. 
In addition to the safety instructions in this manual follow the regulations of safety, accident prevention 
and environmental protection. If the device is integrated into a system, the safety of the system in which 
the device is integrated is in the responsibility of the installer of the system. 

 
 

2.4 

Warning Notes 

The following symbols are used in this manual and may be stick on the device as a mark for infor-
mation, restrictions, preventive measures and safety instructions. This information indicates risks and 
how they can be avoided. 

Summary of Contents for METIS H311



























































Reviews:

No comments