SensoData 5500
26
– Operator’s Manual
C.
Fold-out tripod
Measurement system can be equipped with a fold-out tripod adapted to mount several measuring transducers with
accessories. The tripod consists of the following parts presented in the photos below.
The way of assembling of the tripod is shown in the photos below. Attention should be paid to the pipes D1 ... D3 turn in
the order corresponding to the incisions, ie. D1 pipe (single) to the D2 (dual), and D2 to D3 pipe (triple). D1 pipe should be
inserted to the base of the tripod and locked by the knob. Then place the grips for fastening the measuring modules and DIN
grips for the accessories and lock them using the knobs.
D.
Grip for the measurement modules
The grip enables to mount on the tripod the measuring module at the any height from the floor.