FT 80 RLA Distance sensor - 068-13715 - 04.05.2009-03
Mounting and
operating instructions
44
Order information
Part no.
Sensor type
Description
574-41020
FT 80 RLA-500-L8
Distance sensor, 250 to 750 mm, Resolution 0.1% of measuring range,
2 x PNP, N.O./N.C., 4 to 20 mA, M12 8-pin connector, *
574-41024
FT 80 RLA-500-S1L8
Distance sensor, 250 to 750 mm, Resolution 0.1% of measuring range,
2 x PNP, N.O./N.C., 4 to 20 mA, RS485,M12 8-pin connector, *
* each include relevant mounting and operating instructions for FT 80 RLA-500 (No. 068-13715)
Accessories
(not included in standard delivery)
Part no.
Accessory
Description
902-51646
L8-5m-G-PUR
Connection cable M12, 8-pin, 5 m in length, straight, PUR
902-51671
L8-2m-G-PUR
Connection cable M12, 8-pin, 2 m in length, straight, PUR
902-51687
CL8F-2m-W-PUR
Connection cable M12, 8-pin, 2 m in length, angled, PUR
902-51688
CL8F-5m-W-PUR
Connection cable M12, 8-pin, 5 m in length, angled, PUR
820-41000
MS F80
Recommended mounting bracket
533-11013
PC-SW ProgSensor
Software
533-11017
K2-ADE-TB
Interface converter RS 485/422 to RS 232
901-05097
CUSB-RS232-2m
Interface cable incl. CD-ROM USB-RS 232
To operate the FT 80 RLA S1 sensor on a PC, the PC must be equipped with a RS 485 interface. If
this is not the case the existing interface (RS 232, USB, etc.) can be used with a adaptor.
If your PC has a RS 232 interface, we recommand to use the RS 232 converter K2-ADE-TB*.
If your PC has a USB interface, you will need in adition the interface cable CUSB-RS232-2m*.
*See article number in accessories list above
Data sheets, instruction manuals and software can be downloaded from www.sensopart.com