Sensea OPALE 3276007298758, Assembly, Use, Maintenance Manual

Page: 33 / 36

ES
PT
IT
EL
PL
RO
EN
FR
Read this user manual carefully before using the appliance, and keep it for future reference and pass it
on to a third party if necessary.
WARNING SYMBOLS
INSTALLATION
GENERAL SAFETY INSTRUCTIONS
Class II. Double
insulation,
for the luminaire.
Read the instructions
carefully.
Compliance with European
Regulatory Requirements.
LED 220-240 V
IRC 80 - 5700 °K
Protection rating:
Protected against solid objects greater than 1 mm.
Protected against splashing water from
all directions.
V2
Classe 2
IP44
*
Lights not designed to be
installed directly on normally
Minimum distance between
the mirror and any illuminated
object (0.5 metre).
WARNING:
When using electrical appliances, comply with basic safety precautions in
!
WARNING:
The electrical installation must only be carried out by professionals in
accordance with local regulations.
WARNING:
This cabinet must be installed in
volume 2 only or in an outside zone, in accordance with standrars
NFC15-100 and ute c15-801. If the layout of your bathroom is
installation. The product must be powered by a circuit that is
protected by a residual current monitor (RCM) less than or equal to
30 mA. this must be connected to the power supply via a Class 2, IP44
junction box in accordance with NFC standar and 15-100 and UTE
C15-801, and with terminals with a nominal section equal to 2.5
mm . Once installed in its position of use, the connecting cables must
not be visible, accessible or under stress.
!
!
1. General Instructions
No-one, and in particular no child, must be in the vicinity of the workplace. Check that the electrical
!
WARNING:
de-activate it, and make sure that it cannot be re-activated.
- Before drilling a hole, make sure that there is no risk of drilling through an existing non-visible cable or pipe.
- Minimum distance between the mirror and illuminated objects must be 0.5 metre.
installation in volumes 2
and out volume
V2 / out of volume
!
cf: NFC15-100
60 cm
60 cm
ou volume
volume
1
volume 2
2.25 m
out volume
volume
1
out volume
volume 2
volume 0
volume 0
Make sure the power outlet is out of volume 2.