Page 9
Installation
12NP Manual
INSTALLATION
Mount the Inverter
NOTE: The inverter mounting location should provide adequate ventilation and clearance to maintain room
temperature during operation. At least ½” of clearance is required on all sides except the bottom. This includes ½”
beyond the mounting flanges and DC terminal covers.
Installation Tools
The following tools may be required for inverter installation:
•
Wire Termination Crimper
•
Cable-Ties
•
Drill
•
9/16” Socket or Open Ended Wrench
•
Phillips Screwdriver
•
Tape Measure
•
Wire Cutters
•
Wire Strippers
•
3/16’’ Slotted Screwdriver
1.
Locate a suitable, secure, vertical or horizontal mounting surface as close to the batteries as possible without
being in the same airtight compartment.
2.
Mount the inverter using four ¼-20 steel bolts, flat and lock washers, and nuts. The length of the bolts should
be equal to the mounting material thickness plus ¾”.
