Web server
EN
Web server
In order to configure the WiCOS AP access point and with it the complete WiCOS
conference system, you have to call up the web server of the access point. For this,
you require a computer with network connection (RJ 45). For more information on
the web server, refer to the detailed instruction manual.
왘
Use the supplied network cable (Cat5) to connect the network socket (RJ 45)
of the access point to your computer.
왘
Make sure that your computer is set to the same address range as the access
point (IP range: 192.168.0.xxx, subnet mask: 255.255.255.0).
왘
In the address box of the browser (e.g. Internet Explorer or Firefox), type the
IP address of the access point “192.168.0.10”.
The web server appears and prompts for a password.
Accessories and spare parts
WiCOS AP specifications
Factory default settings of the access point’s web server
IP address
“
192.168.0.10
”
Subnet mask
“
255.255.255.0
”
Password
“
123
”
Accessories and spare parts for the WiCOS conference system can be found
on our website at www.sennheiser.com.
Frequency response
150–15000 Hz
Frequency ranges
2.4 GHz; 5.1–5.8 GHz
Signal-to-noise ratio
> 70 dB(A)
Supply voltage
24 V
Power consumption
6 W
Operating temperature
41
°
F
to
113
°
F
Dimensions
approx.
10.24
x
9.05
x
1.5 in.
Weight
approx. 2
lbs. 11.03 oz.
Color
RAL 7035
BB_WiCOS-AP.fm Seite 10 Dienstag, 21. April 2009 3:01 15
4