![background image](http://html1.mh-extra.com/html/sennheiser/tr-5000/tr-5000_instruction-manual_1241107021.webp)
Using the RS 5200
RS 5200 | 21
Switching the wireless headphone
system off
▷
Take the stethoset receiver off so that the ear bows fold inwards.
The stethoset receiver automatically switches off after 20 sec-
onds. The
Receiver status
LED goes off. The transmitter automat-
ically switches off (standby) when there is no stethoset receiver
connected. The
Transmitter status
LED goes off.
▷
Always store the stethoset receiver in the transmitter’s charging
compartment to ensure that it is fully charged when needed.
The charging process starts (see page 15).
* LED goes off
To disconnect the transmitter from the power supply system (e.g.
when you are on holiday):
▷
Unplug the power supply unit from the wall socket.
Wearing the stethoset receiver
▷
Wear the stethoset receiver so that it hangs freely from your ears
and rests lightly on your chest. When putting the stethoset
receiver on, observe the
L
(left) and
R
(right) markings on the rear
of the ear bows. The volume buttons face away from your body to
facilitate ease of use.
▷
Wear the stethoset receiver so that
– the ear pads are positioned just in front of your ear canals.
– you feel a gentle pressure on your ears. The ear pads adapt to
your ear form. Any feeling of pressure should disappear after a
very short time.
– If you find the ear pads uncomfortable, try other ear pads (see
page 5).
– the stethoset receiver hangs freely from your ears and rests
lightly on your chest.
If the stethoset receiver is outside the transmission range for
more than 5 minutes or if the transmitter receives no audio
signal for more than 30 minutes, the wireless headphone
system switches off automatically (standby).
OFF
+
If you use the memory foam ear pads, you can compress the
ear pads a bit to adjust them to your ear shape.