CARD 20 TWS Bluetooth Earphones User Manual
Dear customers,
Welcome to use CARD 20 TWS Bluetooth Earphones!
Please read this user manual carefully before using, which can help you better understanding.
一、
一、
一、
一、
Product Introduction
Charging Box
1.
Indicator, Turn on(open the cover)
2. Storage Box
3. Type-C Charging Port
Earphones
1. Speaker, Indicator, Mutifunction Touch Botton, Microphone
When open/close the charging box, turn on/turn off automatically.
When the phone is not connected, the earphones will automatically turn off after 5 minutes.
During use, if you need to turn off the earphone, first shut down the bluetooth connection of the
mobile phone, and then tap the earphone 7 times.
二、
二、
二、
二、
Earphone Pairing
1.
Open the charging box, the earphone will been automatically pairing mode.
2.
Turn on the device Blutooth settings to searching the connection
3.
Find the name of the Bluetooth signal named “CARD20” and click Pair to connect the
Bluetooth earphone. At this time, the “CARD (R)” dialog box for requesting pairing will pop
up. Click Connect. The Bluetooth earphone will prompt “CONNECTED” and the pairing is
successful.
When you use again, once open the charging box the earphone will be connected
automatically under Bluetooth keeps turning on.
When using one earphone reference the above same mathod.
