![background image](http://html1.mh-extra.com/html/sennheiser/tr-5000/tr-5000_instruction-manual_1241107028.webp)
Cleaning and maintaining the RS 5200
28 | RS 5200
Cleaning and maintaining the
RS 5200
To clean the wireless headphone system:
▷
Switch your wireless headphone system off and disconnect the
transmitter from the wall socket before cleaning.
▷
Clean the product only with a soft, dry cloth.
▷
Clean the charging contacts on the stethoset receiver and in the
charging compartment from time to time using e.g. a cotton
swab.
To clean the ear pads:
▷
Reach behind the ear pads with your fingernails so that you can
carefully detach the ear pads from the stethoset receiver.
▷
Clean the ear pads under lukewarm running water.
▷
Let the ear pads air dry at room temperature for at least 12 hours
before using them again.
▷
Put the ear pads back on the stethoset receiver.
The rubber ring of the ear pads locks into place on the stethoset
receiver.
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-circuit
and damage the electronics.
▷
Keep all liquids far away from the product.
▷
Do not use any solvents or cleansing agents.