![background image](http://html.mh-extra.com/html/sennheiser/skm-5200/skm-5200_instructions-for-use-manual_1242274012.webp)
14
Doing a frequency check
The radio microphone has a frequency check mode that prevents
that the radio microphone transmits on an unwanted frequency
after switch-on.
If you want to select another frequency, proceed as follows:
Release the red button
.
Within five seconds, press the multi-functions switch
twice
(switch position
SET
).
You will be passed to the “
CHAN
” or “
TUNE
” menu and can
change the transmission frequency as required. (See “Adjust-
ment tips for the operating menu” on page 23.)
Identifying the radio microphone
The radio microphone comes with nine interchangeable color-
coded identification markers, allowing you to clearly identify each
radio microphone.
When switching on the device, keep
the red button
depressed.
The current frequency is displayed
on the display panel without the ra-
dio microphone transmitting.
If the displayed frequency is the
wanted frequency, you can release
the red button
.
After five seconds the “RF“
icon
appears and the radio microphone
starts transmitting.
To remove the identification
marker, press the two snap-in pins
together while sliding the
identification marker out of the
guide rails.
Put on the new identification
marker by sliding it onto the guide
rails.
MHz
RF
SKM 5200_512717_0506_Sp6.book Seite 14 Donnerstag, 7. Dezember 2006 3:28 15
Summary of Contents for SKM 5200
Page 1: ...3 Instructions for use SKM 5200 ...
Page 31: ......