![background image](http://html.mh-extra.com/html/sennheiser/skm-5200/skm-5200_instructions-for-use-manual_1242274021.webp)
23
Adjustment tips for the operating menu
Selecting a channel –
CHAN
Via the “
CHAN
” menu, you can switch between the channels in the
channel banks “FIX“ and “VAR“. The radio microphone is not
transmitting while this adjustment is being made.
When changing to the setting mode of the “
CHAN
” menu, the
current channel number appears on the display. After approx. 1
second, the currently assigned frequency is displayed.
To select a different channel, slide the multi-function switch to
the position
(UP) or
(DOWN). The new channel number
appears on the display panel for approx. 1 second and then the
currently assigned frequency is displayed.
Only after the new setting has been stored (“STORED” has
appeared on the display panel) does the transmitter operate
on the transmission frequency of the new channel.
Selecting the frequencies to be stored in the channel
bank “VAR” –
TUNE
Via the “
TUNE
” menu, you can freely select the frequencies to be
stored in the channel bank “VAR” (variable bank). The radio
microphone is not transmitting while this adjustment is being
made.
Note:
When you have selected the channel bank “FIX” and then
select the “
TUNE
” menu, the radio microphone automatically
switches to channel 01 of the channel bank “VAR” and “VAR”
briefly appears on the display panel.
The transmission frequencies are tunable in 5-kHz steps within a
switching bandwidth of 36 MHz max.
Note:
When operating a multi-channel system, make sure to only
use intermodulation-free frequencies.
1 sec.
CH
CH
MHz
CH
SKM 5200_512717_0506_Sp6.book Seite 23 Donnerstag, 7. Dezember 2006 3:28 15
Summary of Contents for SKM 5200
Page 1: ...3 Instructions for use SKM 5200 ...
Page 31: ......