Sennheiser SET 900, Instruction Manual

Page: 17 / 40

13
Using the Set 900
왘
If you still haven’t found your sound source, press the
channel search button
7
once more.
Notes:
– The channel indicator goes off after 30 seconds so
that the light won’t disturb you in a dark room.
– When using the receiver without the transmitter on
the move (e.g. in a theater), please note that different
information can be transmitted on the channels. Ask
an employee of the venue which information is trans-
mitted on which channel.
왘
Put the receiver on.
The channel indicator
on the
receiver lights up:
For an overview of the channel indi-
cator indications, see table below.
Do you hear the desired sound
source?
Yes:
The receiver has already found the
sound source.
No:
왘
Briefly press the channel search
button
7
.
The sound source is searched for. On
the receiver, the channel indicator
can light up as follows:
Channel
indicator
Frequency You hear
the sound in
2.3+2.8 MHz stereo
2.3 MHz
mono
2.8 MHz
95 kHz
1
7
1