Sennheiser SET 900, Instruction Manual

Page: 15 / 40

11
Using the Set 900
Switching the transmitter on/off
To switch the transmitter on :
왘
Switch your sound source on.
The transmitter automatically switches on. The opera-
tion indicator
C
lights up green.
The transmitter doesn’t switch on?
왘
Read the chapter “If a problem occurs ...” on page 24.
To switch the transmitter off :
왘
Switch your sound source off.
The transmitter automatically switches off after
3 minutes. The operation indicator
C
goes off.
To disconnect the transmitter from the mains :
왘
Pull out the mains connector from the wall socket.
Note:
When not using the transmitter for extended periods of
time (e.g. when you are on holiday), pull out the mains
connector from the wall socket. In this case, however, the
receiver’s rechargeable battery will not be recharged.
Switching the receiver on/off
Hearing damage due to high volumes!
This receiver allows you to set higher
volumes than conventional headphones.
This can cause hearing damage in persons
with healthy hearing and especially in
children.
왘
Before putting the receiver on, set the
volume on the receiver to a low value.
왘
Do not continuously expose yourself to
high volumes.
CAUTION!