25
Additional technical information
Changing the operating mode
The transmitter can be set to a different operating mode. This is useful
when the sound of your sound source is very low and the transmitter
therefore does not always switch on automatically.
Particularities of operating mode 2:
In operating mode 2, the transmitter is
not
switched on by the sound
signal from the sound source.
To
switch
the transmitter
on
:
왘
Take the receiver out of the charging compartment.
To
switch
the transmitter
off
:
왘
Place the receiver into the charging compartment.
If – in operating mode 2 – you want to use a second receiver and charge
its rechargeable battery during operation:
왘
Press the “speech intelligibility” button
for approx. 5 seconds.
The indicator
0
goes off. The charging indi-
cator for the spare rechargeable battery
6
flashes several times:
red:
operating mode 2
green:
operating mode 1 (factory preset setting)
If the operating mode was changed success-
fully, the charging indicator for the spare
rechargeable battery
6
goes off and the
indicator
0
lights up again.
왘
Pull the battery out of the receiver’s battery
compartment
3
.
왘
Slide the battery into the transmitter’s
charging compartment
5
as far as it will go.
0
9
6
3
5
Summary of Contents for Set 830-TV
Page 1: ...Cordless TV Listening System Set 830 TV Instruction manual...
Page 2: ...I 1 2 3...
Page 3: ...II 0 9 5 4 6 7 D C B A 8...
Page 35: ...32 Index...