6
Putting the Set 830-TV into operation
Putting the Set 830-TV into
operation
Setting up the transmitter
왘
Place the transmitter so that:
– there are no obstacles in the light path between
transmitter and receiver and
– transmitter and receiver are not exposed to direct
sunlight. Direct sunlight may interfere with the recep-
tion and may damage the transmitter.
If you are using a
plasma TV screen
:
Plasma TV screens radiate an infra-red signal that can
adversely affect the transmission quality.
왘
Make sure that the transmitter is placed as far as
possible from your plasma TV screen.
왘
If necessary, use a standard extension cable with 3.5 mm
stereo jack plug to reduce the distance between trans-
mitter and receiver. This extension cable is available from
your Sennheiser partner.
Note:
One transmitter can be used to transmit to several
receivers on the same frequency.
Summary of Contents for Set 830-TV
Page 1: ...Cordless TV Listening System Set 830 TV Instruction manual...
Page 2: ...I 1 2 3...
Page 3: ...II 0 9 5 4 6 7 D C B A 8...
Page 35: ...32 Index...