![background image](http://html1.mh-extra.com/html/sennheiser/sdc-8000-sys/sdc-8000-sys_software-manual_1242852060.webp)
Monitoring and controlling a conference
60
“
Loudspeaker
” menu of the central unit (see “Adjusting the audio
settings for the consoles’ built-in loudspeakers” on page 80 of the
SDC 8000 system manual).
왘
In the “Microphone” box, adjust the audio settings for the consoles’
microphones. Here you adjust the same settings as in the
“
Microphone
” menu of the central unit (see “Adjusting the audio
settings for the consoles’ microphones” on page 81 of the SDC 8000
system manual).
y
Use the “Volume” slider to set the volume of the consoles’ built-in
loudspeakers.
y
Use the “Automatic Gain reduction” slider to set the automatic gain
reduction of the consoles’ built-in loudspeakers.
y
Click the “Mute All” check box to mute the conference consoles of all
audio groups .
y
Use the “Low”, “Middle”, and “Treble” sliders in the “Tone” box to
adjust the bass, middle and treble response of the consoles’ built-in
loudspeakers.
Note:
If you change the audio settings via the central unit’s operating menu,
this is automatically detected by the software and immediately
displayed in the “Audio Settings” dialog box.
Changing the conference mode during a conference
To change the conference mode during a conference:
왘
Make sure that no-one is currently speaking.
When changing the conference mode, all microphones are turned off
automatically!
왘
From the “Mode” menu, choose the desired conference mode.
The setting becomes effective immediately. The new conference mode
is displayed in the “Mode” box of the control palette.
Saving or printing the data of all inserted chip cards
To save the data of all inserted chip cards in a file (e.g. in order to
document the presence of the delegates):
왘
From the “Present Badges” menu, choose “Save”.
The file selection box opens.
왘
Select a folder, the file name and the extension “
txt
” and confirm your
selection by clicking the “OK” button.
All inserted chip cards are read and the data are saved in a text file in
the order of the microphone numbers.
Summary of Contents for SDC 8000 SYS
Page 1: ...Software SDC 8000 SYS Software Manual...
Page 94: ...Accessories 94...